Gigabyte Gn-wmag Drivers For Mac
• GN-WMAG IEEE 802.11b/g CardBus Wireless LAN Card User’s Manual Rev. 1.0 First Edition. • Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. • Contents CHAPTER 1 PRODUCT OVERVIEW 1-1.
Gigabyte GN-WMAG drivers will help to eliminate failures and correct errors in your device's operation. Download Gigabyte GN-WMAG drivers for different OS Windows versions (32 and 64 bit). After you have downloaded the archive with Gigabyte GN-WMAG driver, unpack the file in any folder and run it. This driver was installed by many users and received an gigabyte gn wmag rating of 3. The GN-WMAG supports ‘turbo-g,’ a proprietary wireless transfer mode which is in theory capable of transmitting data at mbps. Heat Sink Review Index. The new product combines two advanced technologies and supports Mac OS platform.
I...1 NTRODUCTION 1-2. F...1 EATURES 1-3. P..1 HYSICAL IMENSIONS ACKAGING 1-4. LED I...2 NDICATING IGHT 1-5. S...2 YSTEM EQUIREMENTS CHAPTER 2 INSTALLING THE WLAN CARD 2-1. I & U 98SE)..3 NSTALLING RIVER.
Samsung Printer Drivers For Mac
• Chapter 1 Product Overview 1-1. Introduction This 802.11b/g Wireless Local Area Network (WLAN) card is composed of the MAC, Baseband, and radio components, CARDBUS interface, and two built-in antennas. It operates in 2.4GHz frequency bands, providing fast (up to 108Mbps) and secure (support AES, 802.1x &. • Blink Meaning Looking for network the card has an active No power applied to association connection card LED Blinking GIGABYTE GIGABYTE Condition of the Power Link Receiver 1-5. System Requirements 1-5-1. Supported Platform: IBM PC/AT compatible computer 1-5-2.
Supported Operation System. Installing The Driver & Utility (Win 98SE) Step 1: Insert our setup CD into your CDROM drive. Step 2: Please plug-in your “Gigabyte” WLAN card device. Step 3: Click “Next”, and Insert our setup CD into your CDROM drive. • Step 5: Click “Specify a location”, Click “Browse”, Click “CD-ROM Device:”, Select the directory “ Inf Win98”, and Click “Next”. Step 6: Click “Next”. • Step 7: Click “Finish”.
Step 8: Click “No”. Step 9: Click “Install Wireless LAN Utility”. • Step 10: Click “Next”.
Step 11: Click “I accept this agreement”, and Click “Next”. • Step 12: Click “Next”. Step 13: Click “Finish”.
Step 14: Click “OK”. • Step 15: Click “Finish” and Reboot you computer.
Installing The Driver & Utility (Win98 ME) Step 1: Insert our setup CD into your CDROM drive. Step 2: Please plug-in your “Gigabyte” WLAN card device. Step 3: Click “Specify the location of the device”,Click “Next”, and Insert our setup CD into your CDROM drive. • Step 5: Click “Next”. Step 6: Click “Finish”.
Step 7: Click “No”. • Step 8: Click “Install Wireless LAN Utility”. Step 9: Click “Finish” and Reboot you computer. Installing The Driver & Utility (Win 2000) Step 1: Please plug-in your “Gigabyte” WLAN card device. Step 2: Click “Cancel” Step 3: Insert our setup CD into your CDROM drive, the following window will pop up. Step 4: Click “Install Wireless LAN Utility”. • Step 5: Click “Finish”.
Step 6: Click “Yes”. • Step 7: Click “Yes” and Reboot you computer. Installing The Driver & Utility (Win XP) Step 1: Please plug-in your “Gigabyte” WLAN card device. Step 2: Click “Cancel” Step 3: Insert our setup CD into your CDROM drive, the following window will pop up. Step 4: Click “Install Wireless LAN Utility”. • Step 5: Click “Finish” and Reboot you computer.
• Chapter 3 Using The Utility The Configuration & Monitor Utility is a powerful application that helps you to configure the card and monitor the statistics of the communication link. Unlike the standard method of configuring the card via the operating system utilities (e.g. Control Panel), this application permits the dynamic modification of the configuration parameters while the card is operating. • Figure 3-3. Current link status of the wireless LAN card If you want to turn off the card’s radio, click the radio icon at the bottom of the screen, (see Fig 3-4) shows the result Click “Yes” (see Figure 3-5).
